Cisco 200-125 Exam Preparation Questions For Best Result – Updated 2017

New Updated 200-125 Exam Questions from DumpsSchool 200-125 PDF dumps! Welcome to download the newest DumpsSchool 200-125 VCE dumps: https://www.dumpsschool.com/200-125-exam-dumps.html

Keywords: 200-125 exam dumps, 200-125 exam questions, 200-125 VCE dumps, 200-125 PDF dumps, 200-125 practice tests, 200-125 study guide, 200-125 braindumps

Cisco Certified Network Associate Routing & Switching LAN Switching Technologies certification exam as a profession has an extraordinary evolution over the last few years. Cisco 200-125 Cisco Certified Network Associate exam is the forerunner in validating credentials against. Here are updated Cisco 200-125 exam questions, which will help you to test the quality features of DumpsSchool exam preparation material completely free. You can purchase the full product once you are satisfied with the product.

Version: 16.0
Question: 1

Refer to the exhibit:

What will Router1 do when it receives the data frame shown? (Choose three.)

A. Router1 will strip off the source MAC address and replace it with the MAC address 0000.0c36.6965.
B. Router1 will strip off the source IP address and replace it with the IP address 192.168.40.1.
C. Router1 will strip off the destination MAC address and replace it with the MAC address 0000.0c07.4320.
D. Router1 will strip off the destination IP address and replace it with the IP address of 192.168.40.1.
E. Router1 will forward the data packet out interface.
F. Router1 will forward the data packet out interface.

Answer: A, C, F

Explanation:
Remember, the source and destination MAC changes as each router hop along with the TTL being decremented but the source and destination IP address remain the same from source to destination.

Question: 2

Refer to the exhibit.

Which three statements correctly describe Network Device A? (Choose three.)

A. With a network wide mask of 255.255.255.128, each interface does not require an IP address.
B. With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet.
C. With a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other.
D. With a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other.
E. With a network wide mask of 255.255.254.0, each interface does not require an IP address.

Answer: B, D, E

Question: 3

Which layer in the OSI reference model is responsible for determining the availability of the receiving program and checking to see if enough resources exist for that communication?

A. transport
B. network
C. presentation
D. session
E. application

Answer: E

Explanation:
This question is to examine the OSI reference model.
The Application layer is responsible for identifying and establishing the availability of the intended communication partner and determining whether sufficient resources for the intended communication exist.

Question: 4

Which of the following describes the roles of devices in a WAN? (Choose three.)

A. A CSU/DSU terminates a digital local loop.
B. A modem terminates a digital local loop.
C. A CSU/DSU terminates an analog local loop.
D. A modem terminates an analog local loop.
E. A router is commonly considered a DTE device.
F. A router is commonly considered a DCE device.

Answer: A, D, E

Explanation:
The idea behind a WAN is to be able to connect two DTE networks together through a DCE network. The networks DCE device provides clocking to the DTE-connected interface.

A modem modulates outgoing digital signals from a computer or other digital device to analog signals for a conventional copper twisted pair telephone line and demodulates the incoming analog signal and converts it to a digital signal for the digital device.

Question: 5

Refer to the exhibit.

Host A pings interface S0/0 on router 3. What is the TTL value for that ping?

A. 252
B. 253
C. 254
D. 255

Answer: B

Explanation:
From the CCNA ICND2 Exam book: Routers decrement the TTL by 1 every time they forward a packet; if a router decrements the TTL to 0, it throws away the packet. This prevents packets from rotating forever.I want to make it clear that before the router forwards a packet, the TTL still remains the same. For example in the topology above, pings to S0/1 and S0/0 of Router 2 have the same TTL.
The picture below shows TTL values for each interface of each router and for Host B. Notice that Host A initializes ICMP packet with a TTL of 255:

Question: 6

A network administrator is verifying the configuration of a newly installed host by establishing an FTP connection to a remote server. What is the highest layer of the protocol stack that the network administrator is using for this operation?

A. application
B. presentation
C. session
D. transport
E. internet
F. data link

Answer: A

Explanation:
FTP belongs to the Application layer and it is also the highest layer of the OSI model.

Question: 7

Refer to the exhibit.

After HostA pings HostB, which entry will be in the ARP cache of HostA to support this transmission?

Exhibit A
Exhibit B
Exhibit C
Exhibit D
Exhibit E
Exhibit F
Answer: A
Explanation:
Host A knows host B is on another network so it will send the pings to its default gateway 192.168.6.1. Host A sends a broadcast frame asking the MAC address of 192.168.6.1. This information (IP and MAC address of the default gateway) is saved in its ARP cache for later use.

Question: 8
A network interface port has collision detection and carrier sensing enabled on a shared twisted pair network. From this statement, what is known about the network interface port?

A. This is a 10 Mb/s switch port.
B. This is a 100 Mb/s switch port.
C. This is an Ethernet port operating at half duplex.
D. This is an Ethernet port operating at full duplex.
E. This is a port on a network interface card in a PC.

Answer: C

Explanation:
Modern Ethernet networks built with switches and full-duplex connections no longer utilize CSMA/CD. CSMA/CD is only used in obsolete shared media Ethernet (which uses repeater or hub).

Click Here to Get All Cisco 200-125 Exam Questions:

https://www.dumpsschool.com/200-125-exam-dumps.html